Photo Gallery
Building, installing, and using our weather instruments — one session at a time.
Privacy note: All photos have been reviewed to make sure
no house numbers, street signs, or identifying landmarks are visible.
[ Cutting cups for the anemometer ]
images/gallery/anemometer-build-01.jpg
images/gallery/anemometer-build-01.jpg
Building the anemometer — cutting cups
[ Assembling the rain gauge ]
images/gallery/rain-gauge-build-01.jpg
images/gallery/rain-gauge-build-01.jpg
Assembling the rain gauge
[ Drawing measurement marks ]
images/gallery/rain-gauge-marks.jpg
images/gallery/rain-gauge-marks.jpg
Drawing measurement marks on the gauge
[ Wind vane construction ]
images/gallery/wind-vane-build-01.jpg
images/gallery/wind-vane-build-01.jpg
Cutting and balancing the wind vane
[ Thermometer shelter ]
images/gallery/thermometer-shelter.jpg
images/gallery/thermometer-shelter.jpg
Building the thermometer shelter
[ Setting up the station ]
images/gallery/station-setup-01.jpg
images/gallery/station-setup-01.jpg
Setting up the station for the first time
[ First rainfall reading ]
images/gallery/first-rain-reading.jpg
images/gallery/first-rain-reading.jpg
Taking the first rainfall reading
[ Reading the thermometer ]
images/gallery/thermometer-reading-01.jpg
images/gallery/thermometer-reading-01.jpg
Recording the morning temperature
[ Counting anemometer spins ]
images/gallery/anemometer-reading-01.jpg
images/gallery/anemometer-reading-01.jpg
Counting anemometer rotations for wind speed
[ Working with the mentor on chips ]
images/gallery/mentor-session-01.jpg
images/gallery/mentor-session-01.jpg
Chip-building session with our mentor
[ Wiring the sensors ]
images/gallery/sensor-wiring-01.jpg
images/gallery/sensor-wiring-01.jpg
Wiring up the digital sensors
[ First digital reading ]
images/gallery/first-digital-reading.jpg
images/gallery/first-digital-reading.jpg
The first automatic reading from Stage 2